Issue 41 Unmanned Systems Technology December/January 2022 PteroDynamics X-P4 l Sense & avoid l 4Front Robotics Cricket l Autonomous transport l NWFC-1500 fuel cell l DroneX report l OceanScout I Composites I DSEI 2021 report

Hirth engines Heacy fuel capability makes a difference 35 HF 35 series High performance, Lightweight and Fuel Efficient 60 HP 2-stroke Liquid cooled Heavy Fuel NATO compliant More information: www.hirthengines.com Over 90 years in aviation ENDURING PRECISION! Quality. Endurance. Durability. Operating in 72 countries since 2007. From Arctic to Antarctica. Commercial, NGO, Security and Military users 150K global flight hours as of November 2021. Blue UAS, ATAK, CoT compatible. NATO interoperable. Special Forces Enabling. Civil Airspace Integrated. Stealthy.Safe.Secure. C-ASTRAL Aerospace Demonstrations, Sales, Information sales@c-astral.com glider’s overall length by 144 mm. With an electrically driven piston, the VBE is powerful enough to change the vehicle’s buoyancy quickly. This combines with the tight turning radius bestowed by the vehicle’s roll-to-turn control scheme to give the OceanScout the manoeuvrability and agility it needs to operate successfully in the shallow waters in which important coastal processes occur. “This is important for measuring low- oxygen zones, tracking oil spills, and truly understanding dynamic littoral regions, which are critical for the ocean and coastal populations,” Ordonez says. However, building a smaller and lighter glider demands precise engineering of each component, he notes. For example, the electronics boards have to be shaped and oriented to minimise the space they take up, while the firmware that controls the movement of the battery pack to change the vehicle’s pitch attitude must be more precise. This is also one of the factors that led to the OceanScout being effectively purpose- built in specialised variants from modular building blocks. “Instead of serving as a bus for a multitude of sensors, the glider is use- case specific to optimise cost, endurance and ease of use,” Ordonez explains. “For instance, with the OceanScout- PAM, we have integrated the hydrophone and recording system into the nose cone. That provides the opportunity to mitigate electrical or acoustic noise before offering the sensor to customers.” Rolling for simplicity Mechanical simplicity is also useful when trying to build a small vehicle, and the ability to invert the lift vector of the wings without having to make them movable in relation to the hull is an example of that. At the top and bottom of each vertical zig- zag that describes the vehicle’s progress through the water, it performs a 180 º roll by pivoting the battery pack, a manoeuvre that, by inverting that lift vector, keeps the vehicle stable while it is rising and falling through the water column. The roll manoeuvre also helps to simplify the OceanScout’s navigation sensor suite, or rather, allow it to expand its operational envelope under ice without needing extra sensors to remain safe. The glider has a two-transducer acoustic altimeter from Nortek that measures its height above the sea floor, and rolling onto its back points the altimeter upwards, which in theory should allow it to measure the distance to any ice sheet above. “In practice, sea trials under ice will be required before we can confirm that,” Ordonez says. As it passes through layers and regions of water with different densities, it reacts to these changes to stabilise itself. Density changes alter the glider’s pitch angle, which the attitude and heading reference system picks up, enabling the embedded software to command